Methods to Sealcoat Your Driveway Earlier than Winter


Image for article titled How to Sealcoat Your Driveway Before Winter

Picture: Ok Quinn Ferris (Shutterstock)

We’ve reached the time of 12 months when colder, wetter climate is changing into extra frequent, however there are nonetheless days delicate sufficient to complete last-minute outside tasks earlier than winter. And in case you’ve seen that every spring, your paved driveway appears to be like slightly (or rather a lot) worse for put on, you could be questioning what you are able to do to forestall that from taking place this 12 months.

Properly, in keeping with an article on by Mark Clement, this can be the 12 months to sealcoat your driveway. Right here’s what that’s, and the best way to do it.

What’s driveway sealcoating?

To start with, what’s the purpose of sealcoating your driveway? Based on Clement, it “creates a membrane that protects the concrete or different substrate from the damaging results of the solar, gasoline, rock salt, oil, and ice.” So, actually, driveway sealcoating has year-round advantages, however tends to be related to one thing to do earlier than winter due to how a lot rock salt and ice can do in a single season.

Methods to sealcoat your driveway

The most effective circumstances for sealcoating a driveway are dry climate and temperatures above 50 levels, Clement explains, including that it’s attainable to complete the undertaking over a weekend. Begin by transferring autos to the road, and clipping any grass that’s bordering the driveway or rising up by it, utilizing a string trimmer.

Then take away the grease and filth on the driveway. “This a part of the job requires a common degreaser, which may be utilized with a strain washer that has a detergent reservoir, although a backyard sprayer will work, too,” Clement writes.

You probably have oil and gasoline stains that will repel or discolor the sealer, he says to spot-clear them with a specialised cleanser and a stiff bristle brush. Subsequent, seal massive cracks and fill in any potholes on the driveway. Clements offers extra detailed directions on how to do this in his article.

Now, it’s time to get out the sealant. First, use a 4″ paint brush (that you simply don’t thoughts throwing away) to use the sealant to the borders of a driveway—related, Clement says, to portray the borders of a room earlier than getting out the curler and filling within the massive center space.

When that’s finished and also you’re prepared to maneuver on to the remainder of the driveway (referred to as the “area” on this context), comply with the instructions on the sealant, and seek advice from Clement’s article for extra suggestions.

When you’re completed, Clement advises blocking the foot of the driveway with cones or used sealant to maintain others from driving on it. In the event you’re utilizing a quick-dry sealant, you need to preserve foot visitors off the driveway for about an hour. However Clement says that for two-coat methods, it ought to be car- and pedestrian-free for as much as 48 hours.


Please enter your comment!
Please enter your name here